The NEXUS Eazy
tm filtration systems
|
The Nexus Eazy
tm is
Evolution Aqua’s exciting new filter system incorporating the
industry proven Kaldnes moving bed tm coupled with the
innovative Eazy tm
mechanical filter. The Nexus Eazy
tm
provides outstanding water clarity and quality, pump or gravity fed.
It is extremely Eazy tm
and “clean” to maintain, minimal running costs, requires no service
parts such as foam, is designed and built to last for life as well
as offering unrivalled price performance.
|
 |
How it works:-

 |
The Eazy
tm
is a stainless steel vessel containing a volume of static K1 media
which is located within the centre chamber of the Nexus. Water
enters the centre chamber and then enters the Eazy
tm via
slots in the lower half of the unit. This results in a downward flow
causing many of the larger solids to settle out prior to entering
the Eazy tm.
The size of the slots will not allow large mechanical waste to enter
the cylinder thus acting as a first stage mechanical filtration. The
water then passes through the static K1 media utilizing up and side
flow and this process causes the fine solids to become entrapped.
The mechanically clean water then passes to the outside chamber of
the Nexus where the Kaldnes moving bed
tm is
located for biological treatment prior to being returned to the
pond.
video clip 9 meg |
Maintenance
The Nexus Eazy
tm
is extremely easy and pleasurable to clean. The water pump is
switched off and an air valve is operated which diverts air from the
main Nexus air ring into the base of the Eazy
tm.
This causes the K1 media to be agitated and cleaned vigorously. As
this happens the captured particles are flushed out into the central
chamber of the Nexus, allowing you to see the amount of waste that
has been filtered out. Once the K1 media has been agitated for a
sufficient period, the water in the central chamber is flushed to
waste using the purge valve provided at the base of the Nexus. Once
clean, the air flow is re-directed back to the main air ring and the
system started again. The whole process from start to finish can
take less than two minutes.
Nexus 300
with container
Main benefits
-
The
only filter system on the market incorporating the genuine
Kaldnes moving bed tm technology
-
Foamless filter
-
Superb Water quality and clarity
-
Zero maintenance in biological stage resulting in no loss of
biological performance
-
Easy to clean with air backwash system
-
Unparalleled water quality
-
Low
running costs
-
Low
water loss during cleaning
-
Easy to install
-
Mechanical and Biological filter in one unit
-
Complete system including Easy
tm
-
Small footprint
-
Massively reduced installation cost due to a smaller excavation
area
-
No
expensive interconnecting pipe work
-
Designed and manufactured for a long product life
-
Biological capacity that can grow with your fish-just add more
Kaldnes K1 media
-
Comes complete with adjustable connectors for both inlet and
outlet
-
Unparalleled value for money
-
Open mechanical filter
allowing visual inspection that media is 100% clean after
maintenance
-
Exceptionally easy and
pleasurable to clean
-
Works pump or gravity fed
-
Large flow rates achievable
-
Non pressurised therefore
there is no flow rate loss between maintenance cycles
-
Does not use a high pressure
and costly circulating pump as required in all pressurised
systems
|
Nexus Model |
Max flow rate
in litres/hour |
Pond size with
2 hour turnover |
Pond size with
3 hour turnover |
|
Nexus Easy200
tm |
10,000 |
20,000 |
30,000 |
|
Nexus Easy300
tm |
13,000 |
26,000 |
39,000 |
Retrofit kit for
Nexus300/200
The Easy
tm is
available as a retrofit for existing Nexus300/200 users who wish to
remove their foams.
Easy
200
tm
retrofit kit incorporates the followings items;
Easy 200 tm
Air valve including clips and fixings
Air tube
Kaldnes media K1 (35 litre)
Installation manual
Easy 300
tm
retrofit kit incorporates the followings items;
Easy 300 tm
Air valve including clips and fixings
Air tube
Kaldnes media K1 (45 litre)
Installation manual
Call For More Details!
OR

